Posts Tagged ‘plant pots’

6 Ingenious Ways to Reuse Your Plant Pots [video]

June 13th, 2017 | The flower garden, The vegetable garden | 0 Comments

Salad - Reuse your Plant PotsAnyone who is into gardening will likely have a lot of little plastic pots stacked in their shed!  Plastic pots are perfect for reusing, and here are six ideas on how you can reuse your plant pots in ingenious ways. 

  • Tomato plants are always thirsty and when you plant tomatoes into the open ground, the water seems to just disappear. You can use plastic pots to make a water reservoir halo to help you concentrate the water towards the roots of the plant.  Simply cut off the bottom of the pot with a sharp knife or scissors, then push the pot  half way into the soil.   Plant the tomatoes into the bottom. Now when you water your tomatoes, the pot will help contain the water, ensuring it gradually soaks into the plant.
  • Use an empty plant pot to help transfer a plant into a larger container.  Before adding potting compost to your new container, place an empty pot that is the same size as the old plant pot into the middle of the new larger container. Then add compost into the gaps surrounding the plastic pot. Remove the pot, leaving a ready made hole for you to place your plant straight into its new home.
  • Plastic pots can also be used to created bug hotels. Fill the plastic pots with a variety of materials like bamboo, corrugated cardboard, hollow stems and twigs. then place this in a sheltered position for bugs to find.
  • Garden twine is always useful in the garden, but it can get tangled and make using it a nightmare. Plastic pots can come in handy here. Put the twine into a pot and feed the end through one of the drainage holes. Use Duck Tape on the open end of the pot to keep the twine enclosed.  You now have a handy twine dispenser for easy use in the garden!
  • Scrub your old pots clean and use them as the perfect opportunity to get creative. You can paint, cover and create designs on your old plant pots to brighten up the garden.
  • Larger plastic pots can be used to help with harvesting your vegetables.  Place your harvested vegetables into a pot, then blast them with a jet of water to wash them.  The water will then drain through the holes at the bottom leaving you with clean veg!

If you have any other inventive ways of using pots in your garden, then let us know about it in the comments below. 

6 Ingenious Ways to Reuse Your Plant Pots

6 Ingenious Ways to Reuse Your Plant Pots

How to Make a Self-Watering Plant Pot [video]

July 19th, 2016 | The flower garden, The vegetable garden | 0 Comments


plant potWatering plant pots can take up precious garden time.  Worrying about how your plants will fare when going away on holiday can cause problems too. The answer to this is to create a self-watering plant pot. It’s surprisingly easy to do so give it a go.  This video will take you through the steps of creating your very own self-watering plant pot. 

You’ll need;

  • Two buckets or containers, that can be stacked.
  • 1.5 inch/3cm diameter plastic pipe, long enough to run the length between both containers.
  • A plastic cup/yoghurt pot
  • Quality potting soil and plants
  1. Firstly check you have the right positional set up before starting.  The plastic pipe connecting the two containers needs to be able to reach from the top of the top bucket into the bottom of the bottom bucket.  The two containers also need to stack efficiently to allow enough space for the water underneath.
  2. Start by preparing the wicking chamber (your yoghurt pot) to connect your two containers.  This is a chamber that will draw water from the reservoir to the plants.  You will need to poke lots of holes through the pot to allow water to enter it for it to perform its function.
  3. Next, draw around the pot in the middle of the base of what will be your top bucket and then cut this out to make a large hole.
  4. For the water delivery pipe, cut one end at a 45 degree angle to allow the water to freely flow through to the reservoir. Cut the top end of the pipe so it stands clearly of soil level.
  5. Next cut a hole in the bottom of the top bucket for the pipe, make sure it’s a snug fit.  The top bucket will also require drainage holes for healthy root growth.
  6. Then stack the top bucket into the bottom bucket, then mark where the bottom of the top bucket sits. Remove the top bucket and drill a quarter inch or 5mm hole into the bottom bucket just below the line. This serves as an overflow hole so that the top bucket never gets waterlogged.
  7. Now you need to assemble the container, place the top bucket into the bottom bucket. Fill the wicking chamber with potting soil and slot it into its hole. Slide the piping into its hole in the top bucket.
  8. Fill the top bucket with potting soil, moistening it with water as you fill it, then you can plant into the top bucket.
  9. If you have a lid for your container, then you can go one step further by making a lid for your planter which will serve as a weed mulch, but will also reduce evaporation water loss.

If you think that creating a self-watering plant pot will save you a lot of hard work, then watch the video below which shows you how to make one in further detail.

How do you cope with holiday watering?  If you have top tips, then leave them in the comments below.

How to Make a Self-Watering Plant Pot

Find our range of potted hardy perennial plants here.